Skip to main content
Lighting design: oak framed hall with two wheel chandeliers and warm lit roof timbers

Lighting design

Lighting design in Cork

Cork Lighting provides lighting design in Cork for new builds, extensions and renovations, working from your architect's plans to a layout, a circuit schedule and a control plan. Good lighting design is settled before first fix, when changes cost nothing, rather than discovered afterwards.

Lighting design for Cork homes

A good lighting scheme is built in layers: general light to see by, task light where you work and accent light that gives a room depth. Each layer is controlled separately and brought together in scenes, so a room can change character at the press of a button.

Layered lighting

General, task and accent lighting planned room by room, each on its own circuit so it can be dimmed on its own.

Fitting choices

Beam angles, finishes, colour temperature and colour rendering chosen to flatter the room and the people in it.

Glare control

Fittings positioned and shielded so lights do not dazzle in the places people sit and look.

A circuit schedule

Every circuit listed with its load type, so the electrician and the control system agree from the start.

A control plan

Keypads, scenes and schedules planned with the layout, not added at the end.

Working with your team

We work with your architect, interior designer and electrician, and we are used to a designer leading the look.

Local to you

Lighting design for new builds and renovations around Cork

The best time to design lighting is when the plans are still drawings. Many of the houses we work on in Cork are new builds on private sites and deep renovations of older houses, and in each case an early lighting plan saves the cost of cutting into finished walls and ceilings.

If your designer has already produced a lighting layout, we turn it into a buildable control design. If you have not got one, we can create the layout with you and then produce the schedule and the panel design that go with it.

See the areas we cover in Cork, or go straight to Douglas, Ballincollig, Kinsale.

What our lighting design includes

  • Room by room layouts. Fitting positions and types shown on the plan.
  • A circuit and load schedule. Every circuit and its dimming method.
  • Keypad positions and scenes. A control plan agreed before first fix.
  • Drawings your electrician can use. Clear instructions for the first fix cabling.

Guidance on light levels and glare for homes and workplaces is published by the Society of Light and Lighting, part of CIBSE.

Questions we are often asked

When should I get lighting design done?

Before first fix, ideally when the plans are still drawings. After plastering, changes are far more expensive.

Do I need a lighting designer as well as a control installer?

Many of our clients use their interior designer or architect for the look and us for the control design. We can also produce a full layout ourselves.

What do I get at the end of a lighting design?

A room by room layout, a circuit schedule, a control plan and the drawings your electrician needs.

Can you work from my architect's drawings?

Yes. Send the plans and we will build the lighting design from them.

Can you redesign lighting for an existing house?

Yes. A review of the fittings and circuits often shows where a few changes will make a big difference.

Want advice on lighting design in Cork? Call 021 202 8107 or send the details through our contact form and we will arrange a consultation.

Book a consultation

Tell us about your lighting

Tell us about the house and what you would like the lighting to do. Send your plans or a few photos if you have them, and we will arrange a consultation and follow it with a written, itemised quote.

  • Lighting designed before first fix
  • Crestron first, with every other main brand
  • Backed by 1Install, 19 years installing smart homes

Prefer to talk? 021 202 8107

What are you interested in?