Skip to main content
Lighting control: oak framed hall with two wheel chandeliers and warm lit roof timbersOpen plan kitchen with lit ceiling coves, downlights and warm lighting under the cabinetsGarden path lit by low uplights along a timber fence at duskDark cinema room with a star ceiling, lit wall strips and a large screen

Cork Lighting by 1Install

Lighting control in Cork, designed around you.

Cork Lighting designs, installs and supports lighting control for homes across Cork, from one open plan room to a whole house. Crestron is our main system because its lighting controls carry a lifetime warranty, and we also install Lutron, Control4, Rako, iLight, C-Bus, Dynalite and KNX.

Lifetime warranty

Crestron gives a lifetime warranty on its lighting controls. That is why we choose it.

Dimmers, switches, keypads, sensors, lighting panels and power supplies in a Crestron residential lighting system are covered by a limited lifetime warranty from Crestron. Cover runs for as long as Crestron supports the product, so a fault years from now is not a bill you carry alone.

  • Lifetime cover. Runs from launch until Crestron's published End of Maintenance Date for the product.
  • Installed by us. It applies to products bought through an authorised reseller and installed by one, as 1Install does.
  • Replacement or repair. Crestron repairs, replaces or credits a faulty covered product.
  • Not transferable. Cover belongs to the original owner. Labour, batteries and lamps are not included.

The full wording is in the Crestron lifetime warranty terms, published by Crestron Europe.

Polished steel lighting keypad with engraved scene buttons lit in blue

Why Cork Lighting

Lighting that is planned, not patched.

Good lighting is settled on paper before the first cable is run. We design the layers, the circuits and the controls together, then install and tune them in the finished rooms, so the lighting works the way the house is lived in.

Cork Lighting is the lighting arm of 1Install, the company that designs smart homes and cinema rooms across Ireland, so you get the same engineers and the same standards.

  • Design first. Layouts, circuit schedules and control plans before work starts.
  • Every type of load. Mains switched, mains dimmed, 0-10V and DALI.
  • Scenes tuned in place. Set at night, in the finished room.
  • One team afterwards. The people who built it look after it.

Book a consultation

How it works

Simple from first call to handover

  1. Consultation

    We talk through the house, the plans and how you live, and look at what is already installed.

  2. Lighting design

    You receive layouts, a circuit schedule and a control plan, so everyone agrees before first fix.

  3. Installation

    Panels, dimmers and keypads are fitted and tested, working with your electrician and builder.

  4. Tuning and handover

    Scenes are set in the finished rooms after dark, and you are shown how it all works.

Where we work

Cork city and all of County Cork

Our engineers work across Cork every day from our Cork office, from the city and the harbour towns to Kinsale, West Cork and Mallow.

All areas we cover

Questions we are often asked

What does Cork Lighting do?

Cork Lighting designs, installs and supports lighting control systems for homes across Cork city and county, with Crestron as our main system. We also install Lutron, Control4, Rako, iLight, C-Bus, Dynalite and KNX, and we handle mains switched, mains dimmed, 0-10V and DALI lighting.

Why is Crestron your main system?

Crestron lighting controls carry a limited lifetime warranty, and it is the system 1Install designs and installs most often. It suits larger homes and lighting that sits alongside shading, audio and cinema. We recommend something else when it suits your house better.

What does the Crestron lifetime warranty cover?

Crestron covers residential lighting dimmers, switches, keypads, sensors, panels and power supplies until the product reaches its End of Maintenance Date. It applies to the original owner for products installed by an authorised reseller. Labour, batteries and lamps are not covered.

Can you add lighting control to a house that is already built?

Often, yes. Wireless and hybrid systems can be fitted without opening up walls, and we survey the house before recommending anything.

When should I plan my lighting?

Before first fix, when the plans are still drawings. A lighting design done early costs very little compared with changing finished walls and ceilings.

Who is behind Cork Lighting?

Cork Lighting is part of 1Install, which has designed and installed smart home and AV systems in Ireland for 19 years, with offices in Cork and Dublin.

Which areas do you cover?

All of Cork city and county, from the city suburbs and the harbour towns to Kinsale, Clonakilty, the Mizen and Mallow.

Planning a new build, a renovation or a lighting upgrade? Call 021 202 8107 or send the details through our contact form and we will arrange a consultation.

Book a consultation

Tell us about your lighting

Tell us about the house and what you would like the lighting to do. Send your plans or a few photos if you have them, and we will arrange a consultation and follow it with a written, itemised quote.

  • Lighting designed before first fix
  • Crestron first, with every other main brand
  • Backed by 1Install, 19 years installing smart homes

Prefer to talk? 021 202 8107

What are you interested in?