
Crestron lighting control
Crestron lighting control in Cork
Cork Lighting designs and installs Crestron lighting control in Cork for homes that want every light to behave exactly as they would choose. Crestron is the system 1Install specifies most often, so it is the one we know in the most detail, from the first light layout to the day it is handed over.
Crestron lighting control for Cork homes
Crestron lighting control puts every light in the house on one network, so a single button, touch panel or phone can set the whole mood of a room. It scales from one open plan living space to a large house with grounds, and it can sit alongside blinds, audio, cinema and heating on the same system.
Scenes instead of switches
One press sets the lights for cooking, dining, watching a film or going to bed. Scenes are written for how your household lives, not copied from a template.
Keypads that look right
Engraved keypads in finishes chosen with your designer, placed where your hand goes, with buttons named in plain words such as Kitchen, Garden or All Off.
Every type of load
Switched circuits, mains dimming, low voltage 0 to 10 volt LED drivers and DALI fittings can all be controlled from the same Crestron system.
Phone and touch panel control
Control every room from a wall touch panel or the Crestron Home app, including lights you cannot see from where you are standing.
Timed and automatic lighting
Lights that come on low for the night time walk to the bathroom, switch off when the house is empty and follow a schedule that suits you.
One system for the whole house
Add shading, audio, video and heating to the same platform, so the house works as one rather than five separate apps.
What Crestron lighting does through the day
Sunrise and sleep
Lights ramp up gently while shades open, and a goodnight button turns everything off and closes the shades from the bedroom.
Rooms that notice you
Lights come on when you enter a room and go off shortly after you leave, and hallways can light softly at night.
Sun and schedule
Indoor and outdoor lights can follow the clock or sunrise and sunset, with control from anywhere.
Ambient light sensing
Crestron's SolarSync photosensor and ambient sensing adjust room brightness to the daylight.
Tunable and circadian
Tunable LED lighting follows the day, cooler and brighter in the morning and warmer in the evening.
Scene presets
One touch for entertaining, movie night or a video call, each with its own levels.
Local to you
Crestron lighting designed for Cork homes
Many of the houses we are asked about in Cork are large family homes, extended farmhouses, new builds on generous sites and period houses where every wall matters. Crestron suits all of them, because the keypads are small, the wiring is planned from the drawings, and the system can start in a few rooms and grow.
1Install has designed and installed Crestron systems for 19 years and has a Cork office, so the people who design your lighting are the people who commission it and look after it. There is one team to call, not an installer, a programmer and a supplier to chase.
See the areas we cover in Cork, or go straight to Douglas, Ballincollig, Kinsale.
How a Crestron lighting control job runs
Lighting design
We work from your plans and your designer's lighting layout, room by room, and agree which circuits are switched, dimmed, 0 to 10 volt or DALI.
Wiring and panel plan
We draw the lighting panel, the keypad positions and the cable schedule, so your electrician knows exactly what to run at first fix.
Installation and commissioning
Panels, dimmers and keypads are fitted, every circuit is tested, and the scenes are written and tuned in the finished rooms with the furniture in place.
Handover and support
You get a walk round, a simple guide to your scenes and an ongoing route to support when you want something changed.
What every Crestron lighting control system includes
- A written lighting schedule. Every circuit listed, with the load type, the room and the keypad that controls it.
- A neat central panel. Dimming and switching modules fitted in one cabinet where the cabling is easy to reach for future service.
- Scenes tuned in the finished room. Light levels are set by eye at night, because the figures on a plan never tell the full story.
- Support after handover. Changes to scenes, new keypads and fault finding are handled by the team that built it.
Crestron develops its residential lighting, keypad and control products as one platform, described by Crestron, which is why a lighting system can grow into a whole home system without starting again.
Fixture compatibility
Check your fittings against Crestron's compatibility list
Not every LED fitting dims well on every dimmer. Crestron publishes a lighting fixture compatibility list, and we check your chosen fittings against it before the order is placed, so the lights dim smoothly and do not flicker.
See the Lighting Fixture Compatibility List on Crestron's support site, which may ask you to log in.
Lifetime warranty
A lifetime warranty on Crestron lighting controls
Crestron backs its residential lighting controls with a limited lifetime warranty, and it is the main reason Cork Lighting recommends them. Keypads, dimmers, switches, sensors and lighting panels are covered for the supported life of the product, which is far longer than the usual two to five years.
- Years of protection. A covered keypad or dimmer is protected for its whole supported life, not just the first few years.
- Bought and fitted properly. Cover needs an authorised reseller to supply and install the equipment, which is how every Cork Lighting job is done.
- A fix that costs you nothing for the part. Crestron repairs or replaces a faulty covered product, or credits you toward a new one.
- Limits to know about. It stays with the original owner, and labour, lamps and batteries are not covered.
The full wording is in the Crestron lifetime warranty terms, published by Crestron Europe.
Related services
More from Cork Lighting
Crestron Home lightingThe app, touch panels and keypads that make Crestron simple to live with.
Crestron keypads and switchesHorizon and Cameo keypads, finishes, engraving and real installations.
Crestron DIN rail lightingCentral lighting panels with switching, dimming, DALI and 0-10V modules.
Lutron lighting controlHomeWorks and RadioRA 3: smooth dimming and elegant keypads.
Control4 lighting controlControl4 dimmers, keypads and scenes for homes across Cork.
Rako lighting controlWired and wireless Rako systems with scene keypads and an app.Questions we are often asked
Does Crestron lighting control have a lifetime warranty?
Yes. Crestron gives a limited lifetime warranty on its residential lighting controls, covering the product until its End of Maintenance Date. It applies to the original owner when the products are installed by an authorised reseller, and labour, batteries and lamps are excluded.
How do you know my LED fittings will dim properly on Crestron?
We check them against Crestron's lighting fixture compatibility list before anything is ordered, and we test dimming on site during commissioning.
Is Crestron lighting control only for very large houses in Cork?
No. It is often chosen for large homes, but a single open plan living area with a dozen circuits is a perfectly sensible starting point, and more rooms can be added later.
Can Crestron control the lights I already have?
Usually, yes. Existing switched and dimmed circuits can be taken back to a Crestron panel, though old dimmers and some LED fittings may need replacing so they dim smoothly.
Do I need a new build or major rewiring to have Crestron lighting?
It is easiest at first fix, when cables are run to a central panel. In an existing house we can often use a hybrid of wired and wireless products, and we explain what is possible before you commit.
Does the system still work if the internet goes down?
Yes. Lighting scenes and keypads run on the local Crestron network, so they keep working without a broadband connection. The phone app away from home needs the internet.
Who looks after the system after installation?
The same team at 1Install that designed it. Changes, additions and fault finding all go through one number, and there is a service route for homes that want ongoing support.
How do I get a price for Crestron lighting control in Cork?
Send us your plans or a description of the house and we will arrange a consultation, then give you a written, itemised quote for the design and the equipment.
Want advice on Crestron lighting control in Cork? Call 021 202 8107 or send the details through our contact form and we will arrange a consultation.